AMG-548 hydrochloride

Cat No.:V52424 Purity: ≥98%

COA Product Data Instructions for use SDS

AMG-548 HCl is an orally bioactive, selective p38α inhibitor (Ki=0.5 nM), slightly selective for p38β (Ki=36 nM) and >1000-fold selective for p38γ and p38δ.

AMG-548 hydrochloride Chemical Structure CAS No.: 2437438-16-7
Product category: Casein Kinase

This product is for research use only, not for human use. We do not sell to patients.

Size	Price
500mg
1g
Other Sizes

1-708-310-1919 sales@invivochem.com

Other Forms of AMG-548 hydrochloride:

Official Supplier of:

Top Publications Citing lnvivochem Products

Nature 2021, 597(7874):119-125.

Cell 2020,183:1202-1218.e25.

Science Adv 2022: 8, eabm9427.

Nature 597, 119–125 (2021)

Cell Stem Cell 2020,26(6):845-861.e12.

Science Trans Med 2023,15(701):eadd7872.

STTT 2023,8(1):91.

Cell Reports 2023,42(4):112313

Science Trans Med 2023, 15: eadd7872.

Cancer Cell 2021,39(4):529-547.e7.

Cancer Discov 2022,12(4):1106-1127.

Immunity 2023,56(3):620-634.e11.

J Am Chem Soc 2022,144:21831-21836.

Cell 2020,183:1202-1218.e25.

Science Adv 2022:8,eabm9427.

Nature 2021,597(7874):119-125.

Cell 2020,183:1202-1218.e25.

PNAS Nexus 2022,1(3):pgac063.

ACS Nano 2023,17(10):9110-9125.

Biomaterial 2023 Sep16:302:122333.

Product Description
Bioactivity & Protocols
Physicochemical Properties
Solubility Data
Calculators

Product Description

AMG-548 HCl is an orally bioactive, selective p38α inhibitor (Ki=0.5 nM), slightly selective for p38β (Ki=36 nM) and >1000-fold selective for p38γ and p38δ. AMG 548 HCl also effectively inhibits LPS-stimulated TNFα in whole blood (IC50=3 nM). AMG-548 HCl inhibits Wnt signaling by directly inhibiting Casein kinase 1 isoforms δ and ε.

Biological Activity I Assay Protocols (From Reference)

Targets	p38α 0.5 nM (Ki) p38β 3.6 nM (Ki) p38δ 2600 nM (Ki) p38γ 4100 nM (Ki) dog p38α 5.0 nM (Ki) JNK1 11480 nM (Ki) JNK2 39 nM (Ki) JNK3 61 nM (Ki) CK1
ln Vitro	AMG-548 hydrochloride demonstrates >1000 fold selectivity towards p38γ (Ki = 2600 nM) and p38δ (ki = 4100 nM." The selectivity of AMG-548 hydrochloride against JNK2 (ki=39 nM) and JNK3 (ki=61 nM) is moderate. Additionally, whole blood LPS stimulated TNFa (IC50=3 nM) and IL1b (IC50=7 nM), as well as TNFa-induced IL-8 (IC50=0.7 nM) and IL-1b-induced IL-6 (IC5050=1.3 nM), are all highly inhibited by AMG-548 hydrochloride[1]. Ten micrograms of AMG-548 hydrochloride suppresses the hDvl2 shift[2].
ln Vivo	Rat F of AMG-548 hydrochloride is 62%, while dog F is 47%. In rats, the t1/2 is 4.6 hours, whereas in dogs, it is 7.3 hours[1].
References	[1]. MAP kinase p38 inhibitors: clinical results and an intimate look at their interactions with p38alphaprotein. Curr Med Chem. 2005;12(25):2979-94. [2]. Inhibition of Wnt/β-catenin signaling by p38 MAP kinase inhibitors is explained by cross-reactivity with casein kinase Iδ/ɛ. Chem Biol. 2011 Apr 22;18(4):485-94.

These protocols are for reference only. InvivoChem does not independently validate these methods.

Physicochemical Properties

CAS #	2437438-16-7
Related CAS #	AMG-548 dihydrochloride;2518299-32-4;AMG-548;864249-60-5
Appearance	Typically exists as solid at room temperature
HS Tariff Code	2934.99.9001
Storage	Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Shipping Condition	Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

Solubility Data

Solubility (In Vitro)	May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
Solubility (In Vivo)	Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples. Injection Formulations (e.g. IP/IV/IM/SC) Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline) Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2:* DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution. Injection Formulation 5:* 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline) Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline) Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline) Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil) Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Oral Formulations Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More Oral Formulation 3: Dissolved in PEG400 Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose Oral Formulation 6: Mixing with food powders Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently. (Please use freshly prepared in vivo formulations for optimal results.)

Solubility (In Vitro)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Solubility (In Vivo)

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

Injection Formulations
(e.g. IP/IV/IM/SC)

Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).

View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)

Oral Formulations

Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).

View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders

Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

(Please use freshly prepared in vivo formulations for optimal results.)

Calculator

Mass

Concentration

Volume

Molecular Weight*

Molarity Calculator allows you to calculate the mass, volume, and/or concentration required for a solution, as detailed below:

Calculate the Mass of a compound required to prepare a solution of known volume and concentration
Calculate the Volume of solution required to dissolve a compound of known mass to a desired concentration
Calculate the Concentration of a solution resulting from a known mass of compound in a specific volume

See Example

An example of molarity calculation using the molarity calculator is shown below:
What is the mass of compound required to make a 10 mM stock solution in 5 ml of DMSO given that the molecular weight of the compound is 350.26 g/mol?

Enter 350.26 in the Molecular Weight (MW) box
Enter 10 in the Concentration box and choose the correct unit (mM)
Enter 5 in the Volume box and choose the correct unit (mL)
Click the “Calculate” button
The answer of 17.513 mg appears in the Mass box. In a similar way, you may calculate the volume and concentration.

Concentration (Start)

Volume (Start)

Concentration (End)

Volume (End)

Dilution Calculator allows you to calculate how to dilute a stock solution of known concentrations. For example, you may Enter C1, C2 & V2 to calculate V1, as detailed below:

What volume of a given 10 mM stock solution is required to make 25 ml of a 25 μM solution?
Using the equation C1V1 = C2V2, where C1=10 mM, C2=25 μM, V2=25 ml and V1 is the unknown:

Enter 10 into the Concentration (Start) box and choose the correct unit (mM)
Enter 25 into the Concentration (End) box and select the correct unit (mM)
Enter 25 into the Volume (End) box and choose the correct unit (mL)
Click the “Calculate” button
The answer of 62.5 μL (0.1 ml) appears in the Volume (Start) box

Molecular formula

Total molecular weight

g/mol

Molecular Weight Calculator allows you to calculate the molar mass and elemental composition of a compound, as detailed below:

Note: Chemical formula is case sensitive: C12H18N3O4 c12h18n3o4
Instructions to calculate molar mass (molecular weight) of a chemical compound:

To calculate molar mass of a chemical compound, please enter the chemical/molecular formula and click the “Calculate’ button.

Definitions of molecular mass, molecular weight, molar mass and molar weight:

Molecular mass (or molecular weight) is the mass of one molecule of a substance and is expressed in the unified atomic mass units (u). (1 u is equal to 1/12 the mass of one atom of carbon-12)
Molar mass (molar weight) is the mass of one mole of a substance and is expressed in g/mol.

Volume (to add to vial)

Mass (in vial)

Desired Reconstitution Concentration

Reconstitution Calculator allows you to calculate the volume of solvent required to reconstitute your vial.

Enter the mass of the reagent and the desired reconstitution concentration as well as the correct units
Click the “Calculate” button
The answer appears in the Volume (to add to vial) box

In vivo Formulation Calculator (Clear solution)

Step 1: Enter information below (Recommended: An additional animal to make allowance for loss during the experiment)

Dosage mg/kg

Average weight of animals g

Dosing volume per animal μL

Number of animals

Step 2: Enter in vivo formulation (This is only a calculator, not the exact formulation for a specific product. Please contact us first if there is no in vivo formulation in the solubility section.)

% DMSO

% Tween 80

% ddH₂O

Calculation results

Working concentration： mg/mL；

Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.

Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH₂O，mix and clarify.

Note： (1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.