| Size | Price | |
|---|---|---|
| 500mg | ||
| 1g | ||
| Other Sizes |
| Targets |
DNA polymerases; HIV-1 reverse transcriptase[1]
|
|---|---|
| ln Vitro |
Tenofovir diphosphate functions as a DNA pol inhibitor. Tenofovir-diphosphate exhibits mild inhibitory effects on DNA polymerases (pol) α, δ, and ʫ. Its Ki for PMPApp (PMPAppKi) is 10.2, 10.2, and 15.6, respectively, in relation to the Km for dATP (dATPKm)[1].
|
| Enzyme Assay |
Tenofovir diphosphate (PMPApp) is a weak inhibitor of DNA polymerases (pol) α, δ, and ɛ*, with values for the Ki for PMPApp (PMPAppKi) relative to the Km for dATP (dATPKm) of 10.2, 10.2, and 15.2, respectively. Its incorporation into DNA was about 1,000-fold less efficient than that of dATP, with PMPAppKm values 350-, 2,155-, and 187-fold higher than dATPKm values for pol α, δ, and ɛ*, respectively[1].
|
| References | |
| Additional Infomation |
See also: Tenofovir diphosphate (annotation moved to).
|
| Molecular Formula |
C9H16N5O10P3
|
|---|---|
| Exact Mass |
447.011
|
| CAS # |
166403-66-3
|
| Related CAS # |
Tenofovir diphosphate disodium;2738719-07-6;Tenofovir;147127-20-6;Tenofovir hydrate;206184-49-8;(S)-Tenofovir;147127-19-3;Tenofovir diphosphate triethylamine;2122333-63-3;Tenofovir maleate;1236287-04-9
|
| PubChem CID |
5481180
|
| Appearance |
Typically exists as solid at room temperature
|
| LogP |
0.764
|
| Hydrogen Bond Donor Count |
5
|
| Hydrogen Bond Acceptor Count |
14
|
| Rotatable Bond Count |
9
|
| Heavy Atom Count |
27
|
| Complexity |
662
|
| Defined Atom Stereocenter Count |
1
|
| SMILES |
OP(OP(OP(CO[C@@H](CN1C=NC2C(=NC=NC1=2)N)C)(O)=O)(O)=O)(O)=O
|
| InChi Key |
IACQCQDWSIQSRP-ZCFIWIBFSA-N
|
| InChi Code |
InChI=1S/C9H16N5O10P3/c1-6(2-14-4-13-7-8(10)11-3-12-9(7)14)22-5-25(15,16)23-27(20,21)24-26(17,18)19/h3-4,6H,2,5H2,1H3,(H,15,16)(H,20,21)(H2,10,11,12)(H2,17,18,19)/t6-/m1/s1
|
| Chemical Name |
[(2R)-1-(6-aminopurin-9-yl)propan-2-yl]oxymethyl-[hydroxy(phosphonooxy)phosphoryl]oxyphosphinic acid
|
| Synonyms |
PMPApp; [2-(6-AMINO-9H-PURIN-9-YL)-1-METHYLETHOXY]METHYL-TRIPHOSPHATE; TENOFOVIR-DIPHOSPHATE; [(2R)-1-(6-aminopurin-9-yl)propan-2-yl]oxymethyl-[hydroxy(phosphonooxy)phosphoryl]oxyphosphinic acid; CHEMBL1236349; TNV;
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
