| Size | Price | |
|---|---|---|
| 500mg | ||
| 1g | ||
| Other Sizes |
Aflatoxin M2 is a major metabolite of Aflatoxin B1, which is a naturally occuring mycotoxin produced by the fungi Aspergillus flavus and Aspergillus parasiticus. Aflatoxins are poisonous carcinogens and mutagens that are produced by certain molds (Aspergillus flavus and Aspergillus parasiticus) which grow in soil, decaying vegetation, hay, and grains. They are regularly found in improperly stored staple commodities such as cassava, chili peppers, cottonseed, millet, peanuts, rice, sesame seeds, sorghum, sunflower seeds, sweetcorn, tree nuts, wheat, and a variety of spices. When contaminated food is processed, aflatoxins enter the general food supply where they have been found in both pet and human foods, as well as in feedstocks for agricultural animals. Animals fed contaminated food can pass aflatoxin transformation products into eggs, milk products, and meat. For example, contaminated poultry feed is suspected in the findings of high percentages of samples of aflatoxin-contaminated chicken meat and eggs in Pakistan. The level of toxicity associated with Aflatoxin is Aflatoxin B1>Aflatoxin M1>Aflatoxin G1>Aflatoxin B2>Aflatoxin M2>Aflatoxin G2.
| ADME/Pharmacokinetics |
Metabolism / Metabolites
Aflatoxins are metabolized in the liver by the cytochrome P-450-dependent polysubstrate mono-oxygenase system to less toxic metabolites. The main reactions in aflatoxin metabolism are hydroxylation, oxidation, and demethylation. (A2973) |
|---|---|
| Toxicity/Toxicokinetics |
Toxicity Summary
Aflatoxins produce singlet oxygen upon their exposure to UV (365-nm) light. Singlet oxygen in turn activates them to mutagens and DNA binding species. Aflatoxin metabolites can intercalate into DNA and alkylate the bases through their epoxide moiety, binding particularity to N7-guanine bases. In addition to randomly mutating DNA, this is thought to cause mutations in the p53 gene, an important gene in preventing cell cycle progression when there are DNA mutations, or signaling apoptosis. (L1877, A2859, A2972) The mechanism of action many furocoumarins is based on their ability to form photoadducts with DNA and other cellular components such as RNA, proteins, and several proteins found in the membrane such as phospholipases A2 and C, Ca-dependent and cAMPdependent protein-kinase and epidermal growth factor. Furocoumarins intercalate between base pairs of DNA and after ultraviolet-A irradiation, giving cycloadducts. (L579) |
| References | |
| Additional Infomation |
Aflatoxin M2 has been reported in Aspergillus flavus and Aspergillus parasiticus with data available.
Trace mycotoxin of Aspergillus flavus [CCD].Aflatoxins are naturally occurring mycotoxins that are produced by many species of Aspergillus, a fungus, most notably Aspergillus flavus and Aspergillus parasiticus. Aflatoxins are toxic and among the most carcinogenic substances known. Aflatoxin M2 is a metabolite of aflatoxin B2 in milk of cattle fed on contaminated foods. (Wikipedia) Aflatoxin M2 belongs to the family of Difurocoumarocyclopentenone Series. These are polycyclic aromatic compounds containing a cyclopenten-2-one ring fused to the coumarin moiety of the difurocoumarin skeleton. Difurocoumarocyclopentenones are a subgroup of the aflatoxins and related compounds. |
| Molecular Formula |
C17H14O7
|
|---|---|
| Molecular Weight |
330.28900
|
| Exact Mass |
330.074
|
| CAS # |
6885-57-0
|
| Related CAS # |
Aflatoxin M2-13C17
|
| PubChem CID |
10903619
|
| Appearance |
Typically exists as solid at room temperature
|
| Density |
1.62g/cm3
|
| Boiling Point |
635.6ºC at 760 mmHg
|
| Melting Point |
181-184ºC
|
| Flash Point |
6ºC
|
| Index of Refraction |
1.689
|
| LogP |
1.256
|
| Hydrogen Bond Donor Count |
1
|
| Hydrogen Bond Acceptor Count |
7
|
| Rotatable Bond Count |
1
|
| Heavy Atom Count |
24
|
| Complexity |
655
|
| Defined Atom Stereocenter Count |
2
|
| SMILES |
COC1=CC2=C(C3=C1C4=C(C(=O)CC4)C(=O)O3)[C@@]5(CCO[C@@H]5O2)O
|
| InChi Key |
OQLKWHFMUPJCJY-IAGOWNOFSA-N
|
| InChi Code |
InChI=1S/C17H14O7/c1-21-9-6-10-13(17(20)4-5-22-16(17)23-10)14-12(9)7-2-3-8(18)11(7)15(19)24-14/h6,16,20H,2-5H2,1H3/t16-,17-/m1/s1
|
| Chemical Name |
(3R,7R)-3-hydroxy-11-methoxy-6,8,19-trioxapentacyclo[10.7.0.02,9.03,7.013,17]nonadeca-1,9,11,13(17)-tetraene-16,18-dione
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 3.0276 mL | 15.1382 mL | 30.2764 mL | |
| 5 mM | 0.6055 mL | 3.0276 mL | 6.0553 mL | |
| 10 mM | 0.3028 mL | 1.5138 mL | 3.0276 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
