| Size | Price | Stock | Qty |
|---|---|---|---|
| 5mg |
|
||
| 10mg |
|
||
| 25mg |
|
||
| 50mg |
|
||
| 100mg |
|
||
| 250mg |
|
||
| Other Sizes |
|
Purity: ≥98%
| Targets |
KIT
|
|---|---|
| ln Vitro |
AZD3229 is a potent, pan-KIT mutant inhibitor that exhibits strong single-digit nM growth inhibition against a range of Ba/F3 cell lines driven by mutant KIT (GI50=1–50 nM). Across a wide range of cell types, AZD3229 exhibits strong single-digit nM growth inhibition with a good margin against KDR-driven effects. Its kinome selectivity is comparable to the best of the approved GIST agents, and its selectivity over KDR can be primarily explained by the interaction of water molecules with the protein and ligand in the active site[1].
|
| References | |
| Additional Infomation |
PDGFR alpha/KIT Mutant-specific Inhibitor NB003 is the tosylate salt form of NB003, an orally bioavailable inhibitor of specific mutated forms of platelet-derived growth factor receptor alpha (PDGFR alpha; PDGFRa) and mast/stem cell factor receptor c-Kit (SCFR; CD117), with potential antineoplastic activity. Upon oral administration, PDGFR alpha/KIT mutant-specific inhibitor NB003 specifically targets, binds to and inhibits specific mutant forms of PDGFRa and c-Kit. This results in the inhibition of PDGFRa- and c-Kit-mediated signal transduction pathways and the inhibition of proliferation in tumor cells that express these PDGFRa and c-Kit mutants. PDGFRa and c-Kit, protein tyrosine kinases, are upregulated or mutated in various tumor cell types; they play key roles in the regulation of cellular proliferation and resistance to chemotherapy.
|
| Molecular Formula |
C31H34FN7O6S
|
|---|---|
| Molecular Weight |
651.708368778229
|
| Exact Mass |
651.23
|
| Elemental Analysis |
C, 57.13; H, 5.26; F, 2.92; N, 15.04; O, 14.73; S, 4.92
|
| CAS # |
2248003-71-4
|
| Related CAS # |
AZD3229;2248003-60-1
|
| PubChem CID |
135367697
|
| Appearance |
Light yellow to yellow solid powder
|
| Hydrogen Bond Donor Count |
3
|
| Hydrogen Bond Acceptor Count |
12
|
| Rotatable Bond Count |
11
|
| Heavy Atom Count |
46
|
| Complexity |
873
|
| Defined Atom Stereocenter Count |
0
|
| InChi Key |
AWHHAHZPRULJMA-UHFFFAOYSA-N
|
| InChi Code |
InChI=1S/C24H26FN7O3.C7H8O3S/c1-15(2)21-12-32(31-30-21)13-22(33)28-16-4-6-17(7-5-16)29-24-23-19(25)10-18(35-9-8-34-3)11-20(23)26-14-27-24;1-6-2-4-7(5-3-6)11(8,9)10/h4-7,10-12,14-15H,8-9,13H2,1-3H3,(H,28,33)(H,26,27,29);2-5H,1H3,(H,8,9,10)
|
| Chemical Name |
N-[4-[[5-fluoro-7-(2-methoxyethoxy)quinazolin-4-yl]amino]phenyl]-2-(4-propan-2-yltriazol-1-yl)acetamide;4-methylbenzenesulfonic acid
|
| Synonyms |
AZD3229 tosylate; AZD 3229; AZD-3229; AZD-3229 Tosylate; AZD 3229 Tosylate
|
| HS Tariff Code |
2934.99.9001
|
| Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month Note: Please store this product in a sealed and protected environment, avoid exposure to moisture. |
| Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
| Solubility (In Vitro) |
DMSO: ≥ 100 mg/mL (~153.4 mM)
|
|---|---|
| Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400 (Please use freshly prepared in vivo formulations for optimal results.) |
| Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
| 1 mM | 1.5344 mL | 7.6721 mL | 15.3442 mL | |
| 5 mM | 0.3069 mL | 1.5344 mL | 3.0688 mL | |
| 10 mM | 0.1534 mL | 0.7672 mL | 1.5344 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration： mg/mL；
Method for preparing DMSO stock solution： mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation:：Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O，mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.
Products are for research use only; We do not sell to patients
Copyright 2020 InvivoChem LLC | All Rights Reserved
COA