mAChR1; mAChR3; NF-κB

Penehyclidine hydrochloride (PHC) has been identified to alleviate myocardial injury induced by ischemia/reperfusion (I/R), the regulatory molecules and related mechanisms are unknown[1]. Penehyclidine hydrochloride is a selective antagonist of M1 and M3 receptors. Clinical studies suggest that it is a potential drug for the treatment of chronic obstructive pulmonary disease (COPD)[3].

Compared to the sham-operation group, both model and penehyclidine hydrochloride groups showed increased Zea-Longa scores. Escape latencies were longer and platform crossings were fewer in model and penehyclidine hydrochloride groups compared to the sham-operation group, but penehyclidine hydrochloride demonstrated a shorter latency and more platform crossings than the model group. BDNF and NGF content decreased in model and penehyclidine hydrochloride groups compared to the sham-operation group, with an increase in the penehyclidine hydrochloride group compared to the model group. mRNA expression levels declined in model and penehyclidine hydrochloride groups but were higher in the latter. p-CREB protein expression was lower in model and penehyclidine hydrochloride groups compared to the sham-operation group but higher in the penehyclidine hydrochloride group than the model group. Penehyclidine hydrochloride exhibited neuroprotective effects by upregulating the cAMP/CREB signaling pathway, improving cognitive function in rats with brain injury[1].Penehyclidine hydrochloride can alleviate the pulmonary inflammatory response in rats with COPD undergoing mechanical ventilation. The JNK/SAPK signaling pathway may be involved in this process[3].

This study explored the impact of penehyclidine hydrochloride on cognitive function in rats with brain injury. Sprague-Dawley rats (n=36) were randomly assigned to sham-operation, model, and penehyclidine hydrochloride groups. Rats in the sham-operation group underwent craniotomy, while the model and penehyclidine hydrochloride groups received brain injury models and interventions with normal saline and penehyclidine hydrochloride, respectively. Specimens were obtained two weeks post-intervention. Neurological deficits were evaluated using Zea-Longa scores, and memory was assessed with the Morris water maze test. ELISA determined brain-derived neurotrophic factor (BDNF) and nerve growth factor (NGF) content. mRNA expressions of BDNF and NGF were assessed via qPCR, and phosphorylated CREB (p-CREB) protein expression was measured by Western blotting.[1]

---

In the myocardial ischemia-reperfusion injury (MIRI)-induced rat model, PHC pretreatment significantly improved cardiac function (p < 0.01). Multiple differentially expressed genes, including Z-DNA binding protein 1 (ZBP1), were identified through mRNA sequencing analysis of myocardial ischemic penumbra tissue in MIRI rats. The transduction of the ZBP1 adenovirus vector (Ad-Zbp1) in PHC-pretreated rats exhibited a reversible augmentation in myocardial infarct size (p < 0.01), pronounced pathological damage to the myocardial tissue, as well as a significant elevation of serum myocardial enzymes (p < 0.05). The interaction among ZBP1, fas-associating via death domain (FADD), and receptor-interacting serine/threonine-protein kinase 3 (RIPK3) leads to a remarkable up-regulation of cleaved-Caspase-1 (Cl-Casp-1), N-terminal gasdermin D (N-GSDMD), phospho-mixed lineage kinase domain-like Ser358 (p-MLKLS358), and other regulatory proteins, thereby triggering pyroptosis, apoptosis, and necroptosis (PANoptosis) in cardiomyocytes of MIRI rats. Moreover, the transduction of Ad-Zbp1 in the oxygen-glucose deprivation/re-oxygenation (OGD/R)-induced H9c2 cell model also dramatically augmented the number of cell deaths. However, the intervention of PHC considerably enhanced cell viability (p < 0.01), effectively mitigated the release of myocardial enzymes (p < 0.05), and markedly attenuated the expression levels of PANoptosis regulatory proteins through restraint of ZBP1 expression. Therefore, the therapeutic efficacy of PHC in improving MIRI might be attributed to targeting ZBP1-mediated PANoptosis.[2]

[1].ZBP1-mediated PANoptosis: A possible novel mechanism underlying the therapeutic effects of penehyclidine hydrochloride on myocardial ischemia-reperfusion injury. Int Immunopharmacol . 2024 Aug 20:137:112373.
[2].Penehyclidine hydrochloride improves cognitive function of rats with brain injury via CAMP/CREB signaling pathway. Cell Mol Biol (Noisy-le-grand) . 2024 May 27;70(5):220-225.
[3].The Mechanism of Penehyclidine Hydrochloride and Its Effect on the Inflammatory Response of Lung Tissue in Rats with Chronic Obstructive Pulmonary Disease During Mechanical Ventilation. Int J Chron Obstruct Pulmon Dis. 2021 Mar 31;16:877-885.

Penequinine, Penehyclidine is under investigation in clinical trial NCT02644876 (Preventive Effects of Penehyclidine Hydrochloride Inhalation on Postoperative Pulmonary Complications).

C20H29NO2

315.44976

315.219

C, 76.15; H, 9.27; N, 4.44; O, 10.14

87827-02-9

151937-76-7 (HCl)

137356

Typically exists as solid at room temperature

1.1±0.1 g/cm3

461.0±35.0 °C at 760 mmHg

232.6±25.9 °C

0.0±1.2 mmHg at 25°C

1.588

3.44

1

3

5

23

381

0

OC(C1CCCC1)(COC1C2CCN(CC2)C1)C1C=CC=CC=1

GTKRIWMDLNOSLI-UHFFFAOYSA-N

InChI=1S/C20H29NO2/c22-20(18-8-4-5-9-18,17-6-2-1-3-7-17)15-23-19-14-21-12-10-16(19)11-13-21/h1-3,6-7,16,18-19,22H,4-5,8-15H2

2-(1-azabicyclo[2.2.2]octan-3-yloxy)-1-cyclopentyl-1-phenylethanol

Penequinine; Penehyclidine; Penequine; M 8218; Penethequinine; 1-Cyclopentyl-1-phenyl-2-(quinuclidin-3-yloxy)ethanol; M-8218;

2934.99.9001

Powder      -20°C    3 years

                     4°C     2 years

In solvent   -80°C    6 months

                  -20°C    1 month

Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)

May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples

Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.

---

Injection Formulation 1: DMSO : Tween 80： Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)
*Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution.
Injection Formulation 2: DMSO : PEG300 ：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)
Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil)
Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals).

View More

Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)]
*Preparation of 20% SBE-β-CD in Saline (4°C，1 week): Dissolve 2 g SBE-β-CD in 10 mL saline to obtain a clear solution.
Injection Formulation 5: 2-Hydroxypropyl-β-cyclodextrin : Saline = 50 : 50 (i.e. 500 μL 2-Hydroxypropyl-β-cyclodextrin → 500 μL Saline)
Injection Formulation 6: DMSO : PEG300 : castor oil : Saline = 5 : 10 : 20 : 65 (i.e. 50 μL DMSO → 100 μLPEG300 → 200 μL castor oil → 650 μL Saline)
Injection Formulation 7: Ethanol : Cremophor : Saline = 10： 10 : 80 (i.e. 100 μL Ethanol → 100 μL Cremophor → 800 μL Saline)
Injection Formulation 8: Dissolve in Cremophor/Ethanol (50 : 50), then diluted by Saline
Injection Formulation 9: EtOH : Corn oil = 10 : 90 (i.e. 100 μL EtOH → 900 μL Corn oil)
Injection Formulation 10: EtOH : PEG300：Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL EtOH → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline)

---

Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium)
Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose
Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals).

View More

Oral Formulation 3: Dissolved in PEG400
Oral Formulation 4: Suspend in 0.2% Carboxymethyl cellulose
Oral Formulation 5: Dissolve in 0.25% Tween 80 and 0.5% Carboxymethyl cellulose
Oral Formulation 6: Mixing with food powders

---

Note: Please be aware that the above formulations are for reference only. InvivoChem strongly recommends customers to read literature methods/protocols carefully before determining which formulation you should use for in vivo studies, as different compounds have different solubility properties and have to be formulated differently.

---

 (Please use freshly prepared in vivo formulations for optimal results.)