Size | Price | |
---|---|---|
100mg | ||
250mg | ||
500mg | ||
Other Sizes |
ln Vitro |
Plant, animal, or human chromosomal DNA strains can be treated with quinacrine mustard dihydrochloride (5 μg/ml)[1]. Quinacrine dihydrochloride (28 μM) increases the amount of mutations that arise following bacterial exposure[2]. 0.2 μM quinacrine mustard dihydrochloride, applied for 4 hours, causes cell cycle arrest in HL-60 cells at the G2+M-phase[3]. In HL-60 cells, quinacrine mustard dihydrochloride (0.2 μM; 4h) had no cytotoxic effect when caffeine (5 mM) is added[3].
|
---|---|
Cell Assay |
Cell Cycle Analysis[3]
Cell Types: HL-60 cells Tested Concentrations: 0.2 µM Incubation Duration: 4 h Experimental Results: Induced cell cycle arrest at G2+M-phase with the accumulation of cells in this compartment by 50%. |
References |
[1]. Caspersson T, et al. Fluorescent labeling of chromosomal DNA: superiority of quinacrine mustard to quinacrine. Science. 1970 Nov 13;170(3959):762.
[2]. Piosik J, et al. Alleviation of mutagenic effects of polycyclic aromatic agents (quinacrine mustard, ICR-191 and ICR-170) by caffeine and pentoxifylline. Mutat Res. 2003 Sep 29;530(1-2):47-57. [3]. Kapuscinski J, et al. The modulation of the DNA-damaging effect of polycyclic aromatic agents by xanthines. Part I. Reduction of cytostatic effects of quinacrine mustard by caffeine. Biochem Pharmacol. 2002 Feb 15;63(4):625-34. |
Molecular Formula |
C23H30CL5N3O
|
---|---|
Molecular Weight |
541.77
|
CAS # |
4213-45-0
|
Appearance |
Typically exists as solids (or liquids in special cases) at room temperature
|
SMILES |
Cl.ClCCN(CCCC(NC1C2C=CC(=CC=2N=C2C=CC(=CC=12)OC)Cl)C)CCCl
|
HS Tariff Code |
2934.99.9001
|
Storage |
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month |
Shipping Condition |
Room temperature (This product is stable at ambient temperature for a few days during ordinary shipping and time spent in Customs)
|
Solubility (In Vitro) |
May dissolve in DMSO (in most cases), if not, try other solvents such as H2O, Ethanol, or DMF with a minute amount of products to avoid loss of samples
|
---|---|
Solubility (In Vivo) |
Note: Listed below are some common formulations that may be used to formulate products with low water solubility (e.g. < 1 mg/mL), you may test these formulations using a minute amount of products to avoid loss of samples.
Injection Formulations
Injection Formulation 1: DMSO : Tween 80: Saline = 10 : 5 : 85 (i.e. 100 μL DMSO stock solution → 50 μL Tween 80 → 850 μL Saline)(e.g. IP/IV/IM/SC) *Preparation of saline: Dissolve 0.9 g of sodium chloride in 100 mL ddH ₂ O to obtain a clear solution. Injection Formulation 2: DMSO : PEG300 :Tween 80 : Saline = 10 : 40 : 5 : 45 (i.e. 100 μL DMSO → 400 μLPEG300 → 50 μL Tween 80 → 450 μL Saline) Injection Formulation 3: DMSO : Corn oil = 10 : 90 (i.e. 100 μL DMSO → 900 μL Corn oil) Example: Take the Injection Formulation 3 (DMSO : Corn oil = 10 : 90) as an example, if 1 mL of 2.5 mg/mL working solution is to be prepared, you can take 100 μL 25 mg/mL DMSO stock solution and add to 900 μL corn oil, mix well to obtain a clear or suspension solution (2.5 mg/mL, ready for use in animals). View More
Injection Formulation 4: DMSO : 20% SBE-β-CD in saline = 10 : 90 [i.e. 100 μL DMSO → 900 μL (20% SBE-β-CD in saline)] Oral Formulations
Oral Formulation 1: Suspend in 0.5% CMC Na (carboxymethylcellulose sodium) Oral Formulation 2: Suspend in 0.5% Carboxymethyl cellulose Example: Take the Oral Formulation 1 (Suspend in 0.5% CMC Na) as an example, if 100 mL of 2.5 mg/mL working solution is to be prepared, you can first prepare 0.5% CMC Na solution by measuring 0.5 g CMC Na and dissolve it in 100 mL ddH2O to obtain a clear solution; then add 250 mg of the product to 100 mL 0.5% CMC Na solution, to make the suspension solution (2.5 mg/mL, ready for use in animals). View More
Oral Formulation 3: Dissolved in PEG400  (Please use freshly prepared in vivo formulations for optimal results.) |
Preparing Stock Solutions | 1 mg | 5 mg | 10 mg | |
1 mM | 1.8458 mL | 9.2290 mL | 18.4580 mL | |
5 mM | 0.3692 mL | 1.8458 mL | 3.6916 mL | |
10 mM | 0.1846 mL | 0.9229 mL | 1.8458 mL |
*Note: Please select an appropriate solvent for the preparation of stock solution based on your experiment needs. For most products, DMSO can be used for preparing stock solutions (e.g. 5 mM, 10 mM, or 20 mM concentration); some products with high aqueous solubility may be dissolved in water directly. Solubility information is available at the above Solubility Data section. Once the stock solution is prepared, aliquot it to routine usage volumes and store at -20°C or -80°C. Avoid repeated freeze and thaw cycles.
Calculation results
Working concentration: mg/mL;
Method for preparing DMSO stock solution: mg drug pre-dissolved in μL DMSO (stock solution concentration mg/mL). Please contact us first if the concentration exceeds the DMSO solubility of the batch of drug.
Method for preparing in vivo formulation::Take μL DMSO stock solution, next add μL PEG300, mix and clarify, next addμL Tween 80, mix and clarify, next add μL ddH2O,mix and clarify.
(1) Please be sure that the solution is clear before the addition of next solvent. Dissolution methods like vortex, ultrasound or warming and heat may be used to aid dissolving.
(2) Be sure to add the solvent(s) in order.